aws.elbv2.create_target_group

Call AWS ELBv2 CreateTargetGroup using a CloudConnection UUID.

Overview

Property	Value
Workflow type	Atomic
Library	Base-aws
Version	1.0

Input Schema

Field	Type	Required	Default	Description
organization_uuid	uuid	Yes	—	Authenticated organization UUID used for field resolution and connection scoping.
connection_uuid	uuid	Yes	—	AWS CloudConnection UUID for the target IAM account, scoped to the caller organization.
workflow_run_id	string	No	—	Engine DAG run ID stamped onto child steps.
region	string	No	—	AWS API endpoint region override; omit to use the connection or SDK default.
name	string	Yes	—	The name of the target group. This name must be unique per region per account, can have a maximum of 32 characters, must contain only alphanumeric characters or hyphens, and must not begin or end w...
protocol	string	No	—	The protocol to use for routing traffic to the targets. For Application Load Balancers, the supported protocols are HTTP and HTTPS. For Network Load Balancers, the supported protocols are TCP, TLS,...
protocol_version	string	No	—	[HTTP/HTTPS protocol] The protocol version. Specify GRPC to send requests to targets using gRPC. Specify HTTP2 to send requests to targets using HTTP/2. The default is HTTP1, which sends requests t...
port	integer	No	—	The port on which the targets receive traffic. This port is used unless you specify a port override when registering the target. If the target is a Lambda function, this parameter does not apply. I...
vpc_id	string	No	—	The identifier of the virtual private cloud (VPC). If the target is a Lambda function, this parameter does not apply. Otherwise, this parameter is required.
health_check_protocol	string	No	—	The protocol the load balancer uses when performing health checks on targets. For Application Load Balancers, the default is HTTP. For Network Load Balancers and Gateway Load Balancers, the default...
health_check_port	string	No	—	The port the load balancer uses when performing health checks on targets. If the protocol is HTTP, HTTPS, TCP, TLS, UDP, TCP_UDP, QUIC, or TCP_QUIC the default is traffic-port, which is the port on...
health_check_enabled	boolean	No	—	Indicates whether health checks are enabled. If the target type is lambda, health checks are disabled by default but can be enabled. If the target type is instance, ip, or alb, health checks are al...
health_check_path	string	No	—	[HTTP/HTTPS health checks] The destination for health checks on the targets. [HTTP1 or HTTP2 protocol version] The ping path. The default is /. [GRPC protocol version] The path of a custom health c...
health_check_interval_seconds	integer	No	—	The approximate amount of time, in seconds, between health checks of an individual target. The range is 5-300. If the target group protocol is TCP, TLS, UDP, TCP_UDP, QUIC, TCP_QUIC, HTTP or HTTPS,...
health_check_timeout_seconds	integer	No	—	The amount of time, in seconds, during which no response from a target means a failed health check. The range is 2–120 seconds. For target groups with a protocol of HTTP, the default is 6 seconds....
healthy_threshold_count	integer	No	—	The number of consecutive health check successes required before considering a target healthy. The range is 2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default...
unhealthy_threshold_count	integer	No	—	The number of consecutive health check failures required before considering a target unhealthy. The range is 2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, QUIC, TCP_QUIC, HTTP or HT...
matcher	json	No	—	[HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful response from a target. For target groups with a protocol of TCP, TCP_UDP, UDP, QUIC, TCP_QUIC, or TLS the ra...
target_type	string	No	—	The type of target that you must specify when registering targets with this target group. You can't specify targets for a target group using more than one target type. instance - Register targets b...
tags	list	No	—	The tags to assign to the target group.
ip_address_type	string	No	—	The IP address type. The default value is ipv4.
target_control_port	integer	No	—	The port on which the target control agent and application load balancer exchange management traffic for the target optimizer feature.
provider_native_request	json	No	—	Optional provider-native request overrides for AWS parameters not yet promoted to first-class fields.

Output Schema

Field	Type	Required	Default	Description
organization_uuid	uuid	No	—	Organization UUID echoed from input.
connection_uuid	uuid	No	—	AWS CloudConnection UUID echoed from input.
region	string	No	—	AWS API endpoint region used.
service	string	No	—	AWS boto3 service/client name.
operation	string	No	—	AWS API operation invoked.
request_id	string	No	—	AWS request ID when available.
response	json	No	—	Sanitized provider response object.
items	list	No	—	Primary response item list when the API returns a collection.
result_count	integer	No	—	Count of primary response items.
next_page_token	string	No	—	Pagination token for the next page.
failure_reason	string	No	—	Human-readable failure reason.
failed_step	string	No	—	Failed logical step.
failed_layer	json	No	—	Failed DAG layer if engine supplies one.
failed_at_state	string	No	—	State where failure occurred.
error	string	No	—	Error message.
error_type	string	No	—	Error class.
failed_at	string	No	—	ISO failure timestamp.

States

State	Initial	Terminal	Success	Auto-advance	Description
pending	Yes	No	—	execute	—
completed	No	Yes	Yes	—	—
failed	No	Yes	No	—	—

State Diagram

Transitions

From	Action	To	Description
pending	execute	completed	—
* (any state)	fail	failed	—

API Usage

POST /api/workflows/start
Content-Type: application/json

{
  "workflow_type": "aws.elbv2.create_target_group",
  "initial_data": {
    "organization_uuid": "value",
    "connection_uuid": "value",
    "name": "value"
  }
}